clean-steam-generator request form | Maxi-Therm Beyond Steam

CSU Model: Clean Steam Unit

Easy Install, Low Maintenance, Low Footprint, Easy Operation and Energy Savings

Using high-pressure steam to generate lower clean steam pressure

Operates with soft, RO or DI water

Complete skid package including touchscreen and blowdown control

Minimum 5% less steam usage with blowdown and condensate pre-heater

Possible package with steam-powered motive pump for condensate return

Easy to install with only 6connections.

BacNet, LON or Modbus protocol

Some Customers: Johnson & Johnson, Whitehead Institute, Vassar Hospital, Sazerac Distillers and more

Simply Fill The Form Below

We Will Get Back to You Shortly With Overall Dimensions and Connections Size and Potential Annual Energy Savings

Main Components Included with a Clean Steam Generator

Vertical heat exchanger, all types 316L stainless steel except carbon steel tube side head. ½” OD x 0.049’’ wall SA-249-TP316L stainless steel u-tubes, ASME stamp of 150 psig @400o
Water-level gauge and level controller with high- and low-level alarms
Pressure gauge on clean steam outlet
Steam pressure relief valve with drip pan elbow (item B, shipped loose)
Automatic valve to control clean steam pressure that shuts off on a high-pressure alarm
Electric valves (normally closed) on both the feedwater and the blowdown
System for automatic blowdown with conductivity probe to read total dissolved solids (TDS)
Heavy Duty painted steel frame
Piping, valves, check valve, air eliminator & vacuum breaker, all in stainless steel
Float and thermostatic steam trap and strainer on the condensate outlet
One (1) NEMA 1 UL (other certification available) approved control panel, pre-programmed to perform the start-up and shut down procedures as well as alarms managing. The panel shall include:

1
Programmable controller with optimal control sequence proprietary to Maxi-Therm’s
2
Color HMI and intuitive, easy to use graphic interface with different users’ access levels.
4
Color HMI and intuitive, easy to use graphic interface with different users’ access levels.
5
BACnet (IP and MSTP), LON, Modbus (MTU and TCP) communication protocols are available
6
IoT ready with data acquisition and secure remote access capabilities (ISO 27001 and ISECOM STAR certified) with OPC Embedded Server. Internet connectivity must be provided to the panel via an ethernet cable by the customer for remote for troubleshooting and montoring.
7
Outside disconnect switch to be able to locally shut the power to the panel before opening the door
8
Integral network switch and 120V power supply receptacle to plug a laptop for easy tech support. Laptop can be plugged in with the control panel door closed for more safety.
9
Return to last known state after a power outage

Pressure transducer for clean steam pressure control loop
Start–up supervision by the Manufacturer or Representative
Start–up supervision by the Manufacturer or Representative
Piping on clean steam side to be stainless steel for both water and steam
Thermal insulation by the contractor
The manufacturer must have a five years experience in the manufacturing of vertical clean steam generators
The manufacturer must have a five years experience in the manufacturing of vertical clean steam generators

Want to know more about Maxi-Therm?
Click Here